3D printed inspired by Rumi's weapon from KPOP Demon Hunters. It's suitable for cosplay, collectibles, or gifts. The weapon is scaled to approximately 120 cm.

It is possible to place two 5mm x 100 cm rods in the center.

It is printed in PLA (0.2 mm layer height) and requires assembly. It is shipped in several pieces and comes with a block for assembly and a tutorial for assembling the parts. The parts can be glued together with super glue. I recommend pressing the pieces together for 10 seconds and letting them dry for a few minutes for a strong connection. You can also use glue suitable for 3D printing or epoxy glue.

The PLA may vary in color from the photos depending on availability.

Recommended post-processing:
A 3D printed accessory may have small imperfections that can be corrected. Sand with sandpaper, using a primer or filler spray to achieve a smooth surface. When you're satisfied with the results, your final coat should be a primer before painting with acrylics. You can protect your work with satin or gloss varnish.

My accessories are all designed and made individually by myself. They are not suitable for children; they are for prop and display use only.

Disclaimer:
This is a fanmade item; I am in no way an official reseller or licensed by the relevant intellectual property owners.

If you have another project that I don't offer on my store, you can contact me for a commission.

You can find me on Instagram / Facebook @Darrkarra
At www.Darrkarra.com