3D printed inspired by the Rubilax weapon from the anime Wakfu. For cosplay or simply for a collector's item or a gift. The weapon is scaled to about 50 cm.
The sword is to be assembled.

Two versions are available
- Raw (1 color)
- In color

It is printed in PLA (layer height of 0.2 mm) and is to be assembled. It is sent in several pieces and is accompanied by a block for assembly as well as a tutorial to assemble the parts. The parts can be glued with super glue, I recommend pressing the parts together for 10 seconds and letting them dry for a few minutes for a strong connection. You can also use glue suitable for 3D printing or epoxy glue.

The PLA may be a different color than in the photos depending on arrivals.

Recommended post-processing:
A 3D printed accessory may have small imperfections that can be corrected.
Sand with sandpaper, using a primer or filler spray to obtain a smooth surface. When you are satisfied with the results, your last coat should be a primer, before painting with acrylics. You can protect your work with satin or gloss varnish.

My accessories are all designed and made 1 by 1 by myself. They are not suitable for children, only for use as a prop and display.

Disclaimer:
All rights reserved to Ankama. This is a fanmade item, I am in no way an official reseller or licensed by the relevant intellectual property owners.

If you have another project that I do not offer on my store, you can contact me for a commission.

You can find me
On Instagram / Facebook @Darrkarra
On www.Darrkarra.com