3D printed, inspired by Vendetta's weapon from Overwatch. Perfect for cosplay, as a collector's item, or as a gift.


The dagger is approximately 150 cm long.


To reinforce the structure, you will need two 5 mm x 130 cm rods.


It is printed in PLA (0.2 mm layer height) and requires assembly. It is shipped in several parts and comes with assembly blocks and a tutorial. The parts can be glued with super glue; I recommend pressing the parts together for 10 seconds and letting them dry for a few minutes for a strong bond. You can also use 3D printing glue or epoxy.


The PLA may be a different color than shown in the photos, depending on the batch.


Recommended post-processing: A 3D printed accessory may have minor imperfections that can be corrected. Sand with sandpaper, using a primer or filler spray to achieve a smooth surface. Once you are satisfied with the results, your final coat should be a primer before painting with acrylics. You can protect your work with a satin or gloss varnish.


My accessories are all designed and handcrafted individually by me. They are not suitable for children and are intended for use as props and displays only.


Disclaimer: This is a fan-made item. I am in no way an official reseller or licensed by the relevant intellectual property owners.


If you have a project in mind that I don't offer in my shop, you can contact me for a commission.


You can find me:
On Instagram / Facebook @Darrkarra
On www.Darrkarra.com