3D printed, inspired by Akali Calligraphia's weapon from League of Legends: Wild Rift. Perfect for cosplay, as a collector's item, or as a gift.


The dagger is approximately 40 cm long, and the scythe is approximately 60 cm long.


It is printed in PLA (0.2 mm layer height) and requires assembly. It is shipped in several parts and includes assembly instructions and a tutorial. The parts can be glued with super glue; I recommend pressing them together for 10 seconds and letting them dry for a few minutes for a strong bond. You can also use 3D printing glue or epoxy.


The PLA may vary in color from the photos depending on the batch.


Post-processing recommended: A 3D printed accessory may have minor imperfections that can be corrected. Sand with sandpaper, using a primer or filler spray to achieve a smooth surface. Once you are satisfied with the results, your final coat should be a primer before painting with acrylics. You can protect your work with a satin or gloss varnish.


My accessories are all designed and handcrafted individually by me. They are not suitable for children and are intended for display and use only.


Disclaimer:
All rights belong to Riot Games. This is a fan-made item; I am not an official reseller or licensed by the relevant intellectual property owners.


If you have a project you'd like to commission that isn't currently listed in my shop, please contact me.


You can find me:
On Instagram / Facebook @Darrkarra
On www.Darrkarra.com3D printed, inspired by Akali Calligraphia's weapon from League of Legends: Wild Rift. Perfect for cosplay, as a collector's item, or as a gift.


The dagger is approximately 40 cm long, and the scythe is approximately 60 cm long.


It is printed in PLA (0.2 mm layer height) and requires assembly. It is shipped in several parts and includes assembly instructions and a tutorial. The parts can be glued with super glue; I recommend pressing them together for 10 seconds and letting them dry for a few minutes for a strong bond. You can also use 3D printing glue or epoxy.


The PLA may vary in color from the photos depending on the batch.


Post-processing recommended: A 3D printed accessory may have minor imperfections that can be corrected. Sand with sandpaper, using a primer or filler spray to achieve a smooth surface. Once you are satisfied with the results, your final coat should be a primer before painting with acrylics. You can protect your work with a satin or gloss varnish.


My accessories are all designed and handcrafted individually by me. They are not suitable for children and are intended for display and use only.


Disclaimer:
All rights belong to Riot Games. This is a fan-made item; I am not an official reseller or licensed by the relevant intellectual property owners.


If you have a project you'd like to commission that isn't currently listed in my shop, please contact me.


You can find me:
On Instagram / Facebook @Darrkarra
On www.Darrkarra.com